Metal Plaques Mounting Methods

 

Metal Plaque Blind Mount

Blind Mount (Standard)

Plaque is drilled & tapped to receive studs that will project into the mounting surface. Adhesive is applied to complete the installation.

 

 

 

Metal Plaque Solid Wall Mount

Solid Wall Mount

Plaque is drilled & tapped through entire thickness for stud placement with (or without) optional rosettes. Adhesive is applied to complete the installation.

 

 

 

Metal Plaque Hollow Wall Mount

Hollow Wall Mount

Plaque is drilled & tapped through entire thickness for hollow wall anchor to be applied with (or without) optional rosettes on the face of the plaque.

 

 

 

Metal Plaque Wood Wall Mount

Wood Wall Mount

Plaque is drilled through to receive wood screws with (or without) optional rosettes for installation on wood or other compatible surface.

 

 

 

Metal Plaque Stake Mount

Stake Mount

Plaque is drilled & tapped to receive studs into freestanding stake. Please specify stake length required. Additional charges apply. (24", 36" & 48" are standard.)

 

 

 

Metal Plaque Post Mount

Post Mount

The plaque is drilled and tapped and the provided backplate can be attached to the plaque for a 45° angle or reversed to get a 90° angle.

 

 

 

 

 

 

Rosettes (Optional - no additional cost)

 

Rosettes